How to Set Up A Garage Air Compressor System?

Having a garage air compressor can be very useful if you are the type of person who uses a power tool. An air compressor that is used together with a pneumatic equivalent can make things that you do easily and effortless.

Air compressor is one popular device that can be used on any power tool that you have.In similar with those factories and some plants who use an air compressor, it is also efficient to have one in your house.

This is most commonly used by craftspeople to make their jobs easier. If you are one of them, you know what to do!

Different Specifications of an Air Compressor

An air compressor also comes with different specifications that you need to know. Because of this, when you decide to install an air compressor in your house, you must consider these things.

1. Cubic Feet Per Minute (CFM)

It is one of the most essential qualities of an air compressor that you should consider. It is for you to determine the air that can be produced by the compressor.

All of your pneumatical tools require a specific level of CFM. Meaning, your air compressor must be able to meet these qualifications. 

2. Pounds Per Square Inch (PSI)

Another most critical factor that you should consider in an air compressor is the PSI. There are tools that would need to have a higher psi than other tools. Your air compressor should be able to exceed the maximum requirement that your tools require.

3. Horsepower

This refers to the measurement of your air compressor’s output.

4. Tank Volume

You also must consider the ability of your compressor to compressed air at a given time. Remember that if your compressor holds a greater capacity, then it is more likely easier for its motor every time you use it.

Your tank will be your indicator of the holding capacity of your air compressor.

5. Duty Cycle

You also should consider the span of time that your air compressor is able to run before you need to shut it off and cool down. An ideal air compressor can hold up to 50% or even more, for it to be able to work with prolonged applications like your grinders and saw.

Installing an Air Compressor in Your Garage 101

Surely at this point, you have already decided on which air compressor you will have. Now, all you need to do is to set it up on your garage.

Here are some things that you might want to consider upon installing your air compressor;

  • Choose an area wherein you will put your air compressor.
  • See how much room will you be needing when you work and for your tool applications.
  • Choose the appropriate hose length and its fitting that you will use for attachments.
  • Make sure to put the compressor in an isolator for you to minimize the noise and vibrations.
  • Make sure that it is installed in a nearby outlet.
  • Activate your pneumatical tools.

1. Select a Proper Hose

Having a long hose is your garage sized workplace can only make you lose air between your compressor and your tool. In an ideal house garage area, it is recommended to use a hose that has a measurement of 50 feet.

This way you will have more lengths for any type of set up and can be extended in your driveway if needed. Also, you have to make sure that your hose can handle 150 psi at least.

2. Put in Some Filters

In your inlet valve, tanks and piston, there will be instances that there are some moistures that can get into your air compressor. Also, there are chances that oil from your compressor’s motor to your air tank can happen.

Because of this, having a filtration is a must. Having filtration in your air compressor can prevent from any sort of condensation that can affect the performance of your air compressor.

3. Install a Dryer or A Separator

To secure that you protect your air compressor from moisture and all types of fluids, you have to make sure that your air compressor is always set up with an air dryer and an oil and water separator.

These two devices can actually be linked to a short airline from the outlet of your dryer and the inlet of your separator.

4. Make Sure to Have Enough Air Supply

The last stage in setting up or installing an air compressor in your garage should include quality of air supply. It should be distributing air supply to the right places within your compressor.

Running a line is a simple thing to do once you have the right hose with you. The hose that we are actually talking about should be abrasion resistant and very flexible as well.

Things to Consider After Installation

Think of the future. Just in case that you have an idea on putting up a basting cabinet installed. Having a shut-off valve and a tee fitting on your garage will be a good idea as well.

Also, if you are also planning to get into paint jobs, then having a hose reel will surely help you and is a must for your convenience anyway.

With all these simple processes being said, you will surely be able to set up or install a high-quality air compressor in your garage.

Having this type of machine will inevitably rise to all your project requirements. Furthermore, you should not forget to get some air tools that will go along with your air compressor.

It is because having an air tool will help you lighten your workload, will help you make high productivity and also will prevent you from having any delay and risk on your project.

To conclude, an air compressor is such a big help to craftspeople. It makes their jobs easier, and they will be able to work faster than the usual. It's a thumbs up on getting an air compressor installed in your garage.

Leave a Comment